Tributaries

Bring it all together

Reference Grade Audiophile Cable

Model 8P-C7

by

All Series 8 audio cables are meticulously assembled by hand in Orlando, Florida. Series 8 MKII 2-POLE Power cables begin with extremely high-grade linear crystal copper (LC-OFC) developed specifically for audio applications.  Tributaries 8P cables are designed to support low frequency 50/60Hz signals. Current capabilities of power cables are a major concern. Power amps tend to draw current in pulses. Depending on the output of the power amplifier, too small a gauge of the power cable will result in excess resistance that may restrict the peak level of a required pulse limiting the transient response of the amplifier, but if only large conductors are used the cable tends to lose dynamics and also will not respond quickly to transients; the Series 8 power cables are designed with a unique combination of individually insulated large and medium gauge wires to form an overall 12 AWG design supporting current flow and signal dynamics. The Mark II cables are silver-soldered to Tellurium (TE) copper termination pins which mate perfectly with the new Tributaries power connectors allowing the greatest amount of contact area possible for perfect signal transfer. Noise rejection is key factor in the design of an AC power cable. The 8P alternates the twisted lays in each multi-gauge conductor. Alternating lays cancels all levels of magnetic distortion. Triple shielding is employed to prevent outside noise from penetrating the signal. The Mark II power cables will lower the noise floor without restricting audio dynamics leaving you with more of the recorded audio and video for crystal clear dynamic experience.

The Series 8 Mark II 2-POLE Power cable is stocked in each in lengths from 3 foot, 6 foot and 9 foot with custom lengths available35

Model 8BW

by

All Series 8 audio cables are meticulously assembled by hand in Orlando, Florida. Series 8 Mark II Bi-Wire speaker cables begin with extremely high-grade linear crystal copper (LC-OFC) developed specifically for audio applications.  Tributaries LC-OFC is carefully drawn to produce a low crystal volume per foot resulting in less signal loss and distortion. Conductors consist of multiple solid gauges that are mathematically and tonally chosen to support low, mid and high frequencies for a natural sounding cable. Individually insulating each conductor yields zero strand interaction and better sound quality. It is important to understand that music passing through the speaker cable, is actually an AC voltage, so when voltage passes through twisted wire, there will be additional magnetic fields. Tributaries Star-Quad design not only alternates the positive and negative signal conductors but also alternates the twisted lays in each multi-gauge conductor. Alternating lays cancels all levels of magnetic distortion. The Mark II cables are silver soldered onto proprietary spade lugs and locking banana plug connectors made with Tellurium (TE) copper increasing conductivity and strength. The end result is a dead-quiet neutral sounding cable that accurately produces the sound of live music

The Series 8 Mark II Star-Quad Bi-Wire speaker cable is stocked in each in lengths from 4 foot to 12 foot lengths with custom lengths available.

Model 8BA

by

Available in various lengths to meet your requirements.

The Series 8 Star-Quad Bi-Amp Speaker cable is stocked in each in lengths from 4 foot to 12 foot lengths with custom lengths available

Model 8AD

by

All Series 8 audio cables are meticulously assembled by hand in Orlando, Florida. The Series 8 Mark II Digital Audio cables begin with extremely high-grade linear crystal copper (LC-OFC) that is silver plated to support higher frequency performance specifically for digital audio applications. To maintain a consistent 75 Ohm impedance, the coaxial Series 8 S/PDIF digital audio cable’s 18AWG silver-plated center conductor is surrounded by three perfectly concentric layers of dielectric which consist of a skin, foamed PE and a final skin. Heavy triple shielding block noise from entering the signal path. The Mark II cables are silver soldered onto proprietary RCA connectors made with Tellurium (TE) copper contacts increasing conductivity and strength. The 8AD MKII precision engineering supports wide bandwidth applications to transmit multichannel audio accurately.

The Series 8 Mark II digital audio cable is stocked in each in lengths from ½ meter to 4 meter lengths with custom lengths available.

.

Model 8AB

by

All Series 8 Cables are meticulously assembled by hand in Orlando, Florida. Series 8 Mark II balanced audio cables begin with extremely high-grade linear crystal copper (LC-OFC) developed specifically for audio applications.  Tributaries LC-OFC is carefully drawn to produce a low crystal volume per foot resulting in less signal loss and distortion. Conductors consist of multiple solid gauges that are mathematically and tonally chosen to support low, mid and high frequencies for a natural sounding cable. Individually insulating each conductor yields zero strand interaction and better sound quality. The Series 8 balanced cables are precision-twisted triple balanced in design. Three dedicated conductors with equal impedance for positive, negative and ground are surrounded by a separate shield to keep noise from reaching the single path. The Mark II cables are silver soldered onto proprietary XLR connectors made with Tellurium (TE) copper contacts increasing conductivity and strength. To reduce signal hum during connection, the Tributaries Series 8 XLR connectors have the female ground (pin 1) placed forward in the shell so the ground connects first. The end result is a dead-quiet neutral sounding cable that accurately produces the sound of live music.

The Series 8 Mark II balanced audio cable is stocked in pair and mono cables in lengths from ½ meter to 4 meter lengths with custom lengths available.

Model 8A

by

All Series 8 audio cables are meticulously assembled by hand in Orlando, Florida. Series 8 Mark II Single-Ended RCA audio cables begin with extremely high-grade linear crystal copper (LC-OFC) developed specifically for audio applications.  Tributaries LC-OFC is carefully drawn to produce a low crystal volume per foot resulting in less signal loss and distortion. Conductors consist of multiple solid gauges that are mathematically and tonally chosen to support low, mid and high frequencies for a natural sounding cable. Individually insulating each conductor yields zero strand interaction and better sound quality. Unbalanced analog audio systems will benefit from using Tributaries Twin-Axial cable design. The precision-twisted Twin-Axial design has dedicated conductors for the positive signal and negative return signal plus a heavy shield that is connected to the source end only. In this design the shield will capture any induced interference sending it to ground at the source end thereby isolating noise away from the input stage of the load. This configuration ensures a clear signal transfer with overall noise rejection as close to balanced as possible. The Mark II cables are silver soldered onto proprietary RCA connectors made with Tellurium (TE) copper contacts increasing conductivity and strength. The end result is a dead-quiet neutral sounding cable that accurately produces the sound of live music

 The Series 8 Mark II Single-Ended audio cable is stocked in pair and mono cables in lengths from ½ meter to 4 meter lengths with custom lengths available.