Tributaries T10X is a 10-outlet power bar with surge suppression, noise filtration and triggering in/out. The T10X is a versatile unit that can be mounted either on the front or the rear of the rack or even on the wall or under a counter. It can be positioned so the outlets face up & down or forward & backward offering multiple options for power management. The 120V/15A/1800watt T10X has a joule rating of 3240j and employs the X3MOV, a patented MOV (Metal Oxide Varister). The X3 dissipates heat more quickly and will last 10 times longer than conventional MOVs. A blue LED on the front panel marked “PROTECTED” indicates the X3 MOV is operational and your electronics are protected from surges. Next to the Protected LED is another blue LED marked “GROUNDED” indicating your home circuit is safely grounded. The T10X has ten outlets total; 6 on the front panel and 4 on the rear panel, all evenly spaced to allow space for transformers or “wall warts”. The front panel incorporates the LED indicator lights and the power switch. The PWRC-T10X Power Extension Bar is a unique power component that offers superior surge suppression, line filtration, triggering and the flexibility to be installed just about anywhere.
The T10X has a six foot power cable and comes packed with rack ears for mounting.
Model PWRC-T10X
Model 6P-C7
All Series 6 audio cables are meticulously assembled by hand in Orlando, Florida. The Series 6 6P-C7 is a 2-pole non-polarized power cable that is shielded and grounded on the AC end. The cable is engineered with 14AWG conductors that won’t starve power amplifiers of current. Designed exclusively for Tributaries by Jay Victor these cables are designed primarily for low frequency signals of 50/60Hz with conductor size and gauge combinations specific for this purpose. The Series 6 starts with multi-gauge solid High Conductivity Oxygen-Free Copper (HC-OFC) developed specifically for audio applications. Each conductor is insulated with PVC dielectric material that was chosen to isolate vibration caused by alternating current from entering the signal path. For maximum noise reduction alternating lays in cable twisting is employed. Magnetic fields are created when insulated conductors are twisted in a bundle causing distortion. Alternating the twists cancels out magnetic fields eliminating distortion. 6P is triple shielded, shielding from RF and EMI noise results in audible improvements by lowering the noise floor you hear and see more information. Termination of the Series 6 power cable conductors involves first preparing the wires by stripping the PE insulation, maintaining the original twist in the conductor and dipping in a high temperature solder pot. This process bonds the wires into one conductor that is terminated in the light-weight nylon power connector. This construction reduces transmission resistance and improves signal flow
The Series 6 Power cable is stocked in each in lengths from 3 foot, 6 foot and 9 foot with custom lengths available
Model 6P-IEC
All Series 6 audio cables are meticulously assembled by hand in Orlando, Florida. The 6P-IEC is a shielded 3-pole grounded power cable that is engineered with 14AWG conductors that won’t starve power amplifiers of current. Designed exclusively for Tributaries by Jay Victor these cables are designed primarily for low frequency signals of 50/60Hz with conductor size and gauge combinations specific for this purpose. The Series 6 starts with multi-gauge solid High Conductivity Oxygen-Free Copper (HC-OFC) developed specifically for audio applications. Each conductor is insulated with PVC dielectric material that was chosen to isolate vibration caused by alternating current from entering the signal path. For maximum noise reduction alternating lays in cable twisting is employed. Magnetic fields are created when insulated conductors are twisted in a bundle causing distortion. Alternating the twists cancels out magnetic fields eliminating distortion. 6P is triple shielded, shielding from RF and EMI noise results in audible improvements by lowering the noise floor you hear and see more information. Termination of the Series 6 power cable conductors involves first preparing the wires by stripping the PE insulation, maintaining the original twist in the conductor and dipping in a high temperature solder pot. This process bonds the wires into one conductor that is terminated in the light-weight nylon power connector. This construction reduces transmission resistance and improves signal flow.
The Series 6 Power cable is stocked in each in lengths from 3 foot, 6 foot and 9 foot with custom lengths available
Model 8P-IEC
All Series 8 audio cables are meticulously assembled by hand in Orlando, Florida. Series 8 MKII 3-POLE Power cables begin with extremely high-grade linear crystal copper (LC-OFC) developed specifically for audio applications. Tributaries 8P cables are designed to support low frequency 50/60Hz signals. Current capabilities of power cables are a major concern. Power amps tend to draw current in pulses. Depending on the output of the power amplifier, too small a gauge of the power cable will result in excess resistance that may restrict the peak level of a required pulse limiting the transient response of the amplifier, but if only large conductors are used the cable tends to lose dynamics and also will not respond quickly to transients; the Series 8 power cables are designed with a unique combination of individually insulated large and medium gauge wires to form an overall 12 AWG design supporting current flow and signal dynamics. The Mark II cables are silver-soldered to Tellurium (TE) copper termination pins which mate perfectly with the new Tributaries power connectors allowing the greatest amount of contact area possible for perfect signal transfer. Noise rejection is key factor in the design of an AC power cable. The 8P alternates the twisted lays in each multi-gauge conductor. Alternating lays cancels all levels of magnetic distortion. Triple shielding is employed to prevent outside noise from penetrating the signal. The Mark II power cables will lower the noise floor without restricting audio dynamics leaving you with more of the recorded audio and video for crystal clear dynamic experience.
The Series 8 Mark II 3-POLE Power cable is stocked in each in lengths from 3 foot, 6 foot and 9 foot with custom lengths available
Model UHDX
The Tributaries UHDX 18G X-TEND Ultra High Definition HDMI cables were expertly engineered to support 18Gbps for long distance runs. The UHDX is powered by Tributaries’ innovative 18G Go! Active Technology. 18G Go! Active Technology compensates for signal attenuation inherent in copper wires. Each data line is received as an attenuated differential pair. Signal conditioning is performed on the positive and negative inputs and the result is equalized using a built-in test feature in the active electronics. In production each cable is tested and equalization values applied specifically for that cable’s unique attenuation value resulting in consistently reliable 18Gbps UHD HDMI signal transmission. These cables are directional in nature due to active electronics built into the display-end connector. The X-Tend uses a patented power-harvesting technology that only draws 5mA off the HDMI 5V line which allows the Go! Active Technology to be supported without external power supplies and will not draw down the line voltage to ensure signal integrity. That’s why Tributaries guarantees UHDX will provide 18Gbps 4K/60/Deep Color/HDR UHD HDMI signal transmission
The X-Tend Series Active HDMI cable is stocked in each in lengths from 6 meter to 12 meter